Silicone Foam SF40/15-T – 1100 mm
- In stock
- Two-layer construction: medium-firm outside, extra soft in the centre
- Seamlessly bonded – no edge that prints through
- Sheet 1100 x 600 x 10 mm = 0.66 m²
- Developed for collar, shoulder and shaping presses
104,00 €
- / Quadratmeter
plus 19% VAT and shipping costs
- Mindestbestellmenge - 1 Platte = 0,66m²
Secure payment with
Request quickly and easily
No minimum order quantity
Shipping in 2–3 business days
DE AEOC 128459
Directly from the application engineer
Request quickly and easily
No minimum order quantity
Shipping in 2–3 business days
DE AEOC 128459
Directly from the application engineer
Silicone foam SF40/15-T is a two-layer combination pad: medium-firm at the edges, extra soft in the centre, seamlessly bonded together. Sheet format 1100 x 600 mm at 10 mm thickness.
Why different hardnesses in one pad?
On collar and shoulder presses the pressure is unevenly distributed: at the edge the crease must be formed sharply, while in the centre the pad has to absorb the curvature of the workpiece. Two separate pads laid side by side create an edge that prints through; a seamless combination pad does not.
Seamlessly bonded
The two hardness zones are bonded material to material, not glued or assembled. There is therefore no joint where moisture can collect and no edge that imprints into the outer fabric under pressure.
Format and ordering
The sheet measures 1100 x 600 mm at 10 mm thickness, equal to 0.66 m². Invoiced in square metres. For larger presses the 1350 x 600 mm format is available under item 210356T.
Technical data
| Material | silicone foam, two-layer |
|---|---|
| Colour | blue |
| Hardness | medium-firm / extra soft, seamless |
| Thickness | 10 mm |
| Sheet size | 1100 x 600 mm |
| Origin | China |
| Sales unit | m² |
| Item number | 210349T |
| Manufacturer | Trecolan Handels GmbH |
Häufige Fragen
Where exactly is the soft zone?
Centrally along the length; the exact division is matched to typical collar and shoulder presses.
Can the sheet be cut to size?
Yes, but the division of hardness zones should match the press – mark it out before cutting.
Which format do I need?
1100 x 600 mm for smaller presses, 1350 x 600 mm for larger ones.
Order. Cutting. Delivery.
We would be happy to advise you personally on application and use.
